|
|
|
|
 |
 |
 |
 |
 |
|||||||||||||
| ¡¡¡¡¡¡¡¡¡¡Oval Gear Positive Displacement Flowmeter | |||||||||||||||
| LC11 Serial Oval Gear Flowmeter is direct reading of totalizing meter. It is a volume type flowmeter that measures the total volume of the flow through the tube . It can be widely used in petroleum, chemical, medicinal industries, etc.. |  |
||||||||||||||
| Measuring Principle | |||||||||||||||
 |
|||||||||||||||
Under the hydraulic pressure difference of the entrance and the exit of the measuring chamber£¬a pair of oval gears are rotating and discharge the liquid. By counting the number of rotation of the oval gear, we can get the total volume of the liquid flow through the meter. |
|||||||||||||||
| High accuracy , has little influence of the viscosity of the liquid Do not need straight tube to be connected on the inlet and outlet of the meter. |
 |
||||||||||||||
| Technical Parameter | |||||||||||||||
| Model | LC11-15(F) | LC11-20(F) | LC11-25(F) | LC11-40(F) | LC11-50(F) | LC11-80(F) | |||||||||
| Caliber Flowrate range Accuracy Nominal pressure |
mm m3/h % MPa |
15 0.1~1.5 ¡À0.5 1.6 |
20 0.3~3 ¡À0.5 1.6 |
25 0.6~6 ¡À0.5 1.6 |
40 1.5~15 ¡À0.5 1.6 |
50 2.4~24 ¡À0.5 1.6 |
80 6~60 ¡À0.5 1.6 |
||||||||
| Medium temperature |
-20¡æ~+80¡æ -20¡æ~+120¡æ | ||||||||||||||
| Pressure loss of maximum flow Value of minimum division |
0.05
0.1 |
0.05
0.1 |
0.05
0.1 |
0.05
0.1 |
0.05
1 |
0.05
1 |
0.05
10 |
||||||||
| Note: (F)It is the anticorrosive type, it is t made of stainless steel except counting unit. used for measuring raw material of chemicals, food, etc., but not for strong acid and strong alkali. |
|||||||||||||||
|
|||||||||||||||
| ¡¡¡¡¡¡¡¡Down | |||||||||||||||
 |
|||||||||||||||